top of page

Comunidade TNB

Público·64 membros

Itel A15 Flash File MT6580 8.1.0 Customer Care File


Itel A15 Flash File MT6580 8.1.0 Customer Care File >>> https://blltly.com/2tATlv





How to Download and Install Itel A15 Flash File MT6580 8.1.0 Customer Care File


If you are looking for a way to flash or install the stock firmware on your Itel A15 device, then you have come to the right place. In this article, we will show you how to download and install the Itel A15 flash file MT6580 8.1.0 customer care file on your device using SP Flash Tool.


The Itel A15 flash file MT6580 8.1.0 customer care file is a tested and official stock firmware that can help you fix various software issues on your device, such as hang on logo, FRP lock, fastboot mode, display blank or white after flash, dead recovery, dead after flash, etc. The flash file also enables you to upgrade or downgrade your device's Android version, as well as restore your device to its factory settings.


The Itel A15 is a dual SIM smartphone that runs on Android 8.1 Oreo and is powered by a Mediatek MT6580 processor. It has a 5-inch display, a 5MP rear camera, a 2MP front camera, a 2050mAh battery, and 8GB of internal storage that can be expanded up to 32GB via a microSD card.


Requirements


A Windows PC or laptop.


A USB cable.


A backup of your personal data and NVRAM (if possible).


A charged battery (at least 50%).


The Itel A15 flash file MT6580 8.1.0 customer care file (download link below).


The Mediatek VCOM driver (download link below).


The SP Flash Tool (download link below).


Download Links


Here are the download links for the files you will need:


Itel_A15_MT6580_ V019 _20191008_8.1.0.zip (622 MB) [^2^]


Mediatek VCOM driver


SP Flash Tool


How to Flash or Install Itel A15 Flash File MT6580 8.1.0 Customer Care File


Follow these steps to flash or install the Itel A15 flash file MT6580 8.1.0 customer care file on your device:


Extract the downloaded flash file zip package on your computer.


Install the Mediatek VCOM driver on your computer.


Extract the downloaded SP Flash Tool zip package on your computer.


From the extracted SP Flash Tool folder, run flash_tool.exe as administrator.


Go to the Download tab and click on Scatter-loading.


Browse and select the scatter file from the extracted flash file folder.


Select Download Only from the drop-down menu.


Click on Download and connect your switched off device to the computer by pressing volume up and down keys simultaneously.


You will see a flashing process on the screen. Wait until it is completed.


Once it is done, you will see a green tick mark indicating a successful flash.


Disconnect your device and switch it on.


Congratulations! You have successfully flashed or installed the Itel A15 flash file MT6580 8.1.0 customer care file on your device. 061ffe29dd






Informações

Bem-vindo à nossa comunidade! 😍 Você pode se conectar com o...
bottom of page