.png)
Fix ML1660 V1.01.00.30.FLS in Minutes with This Simple Trick
How to Fix ML1660 V1.01.00.30.FLS Error in 5 Easy Steps
If you have a Samsung ML-1660, ML-1665 or ML-1667 printer, you may encounter an error message that says ML1660 V1.01.00.30.FLS. This error means that your printer firmware is outdated and needs to be updated. Updating the firmware can help you solve various problems with your printer, such as paper jams, toner errors, printing quality issues and more.
fix ml1660 v1.01.00.30.fls
In this article, we will show you how to fix ML1660 V1.01.00.30.FLS error in 5 easy steps using a software called reset ML-1660 1665 1666 v1.01.00.34f (generator 1660 v34). This software can help you reset the firmware of your printer and make it work normally again.
Step 1: Download the software
The first step is to download the software from this link: http://www.mediafire.com/?f2a2nnfnndo.... This link is provided by a YouTube user named tarek Azzouz, who uploaded a video tutorial on how to fix ML1660 V1.01.00.30.FLS error using this software. You can also watch his video for more details.
After downloading the software, unzip it and save it to a folder on your computer.
Step 2: Remove the chip from the cartridge or seal it up
The next step is to remove the chip from the toner cartridge or seal it up with a tape. The chip is a small electronic device that communicates with the printer and tells it how much toner is left in the cartridge. If you don't remove or seal the chip, the printer may not recognize the new firmware and still show the error message.
To remove the chip, you need to open the front cover of the printer and take out the toner cartridge. Then, locate the chip on the side of the cartridge and gently pry it off with a screwdriver or a knife. Be careful not to damage the chip or the cartridge.
To seal the chip, you need to cover it with a piece of tape or a sticker. Make sure that the tape or sticker does not interfere with the contacts of the chip or the printer.
Step 3: Connect the printer to the computer and hold the Cancel button
The third step is to connect the printer to your computer using a USB cable and turn it on. Then, hold the Cancel button on the printer until all lights begin flashing. This will put your printer into a special mode that allows you to update the firmware.
Step 4: Run the software and click on "V.30 patch firmware"
The fourth step is to run the software that you downloaded in step 1 through a file called f1660.exe. This file is not in the folder that contains the software, but in another folder that has a similar name.
When you run the file, a window will pop up with two buttons: V.30 patch firmware and V.34 patch firmware. Click on V.30 patch firmware. This will create a new file in the folder called FIX_ML1660_V1.01.00.30.fls, FIX_ML1665_V1.01.00.30.fls or FIX_ML1667_V1.01.00.30.fls, depending on which printer model you have.
Step 5: Drag and drop the file to "usblist2.exe" and wait for the printer to restart
The final step is to drag and drop the file that was created in step 4 to another file icon called usblist2.exe. This will start the process of updating your printer firmware.
Wait until your printer reprograms (about 1 minute) and restarts automatically. Do not turn off your printer or disconnect it from your computer during this process.
After your printer restarts, you should see that the error message is gone and your printer works normally again.
Benefits of Fixing ML1660 V1.01.00.30.FLS Error
By following the steps above, you can fix ML1660 V1.01.00.30.FLS error and enjoy the benefits of having a updated and functional printer. Some of the benefits are:
It can improve your printing quality and speed. Updating the firmware can optimize the performance of your printer and make it print faster and better. You can avoid issues such as blurry or faded prints, streaks or lines on the paper, paper jams or misfeeds, and more.
It can save you money and time. Updating the firmware can extend the life of your printer and toner cartridge. You can avoid wasting toner and paper due to printing errors, and reduce the need for repairs or replacements. You can also save time by avoiding troubleshooting or contacting customer support.
It can protect your printer and computer from security threats. Updating the firmware can fix any bugs or vulnerabilities that may exist in your printer software. This can prevent hackers or malware from accessing your printer or computer through the USB connection, and stealing or damaging your data.
Tips for Fixing ML1660 V1.01.00.30.FLS Error
To ensure a successful and safe firmware update, here are some tips that you should follow:
Make sure that your printer model is compatible with the software. The software that we provided in this article is only compatible with Samsung ML-1660, ML-1665 and ML-1667 printers. Do not use it for other models or brands of printers, as it may cause damage or malfunction.
Make sure that your computer and printer are connected to a stable power source. It is preferable that your computer is connected to a UPS (uninterruptible power source) device, and your printer is plugged into a wall outlet. This can prevent any power interruptions that may occur during the firmware update process, which can result in errors or failures.
Do not turn off your printer or computer during the firmware update process. Turning off your printer or computer while the firmware is being updated can cause corruption or loss of data, which can make your printer unable to work. Wait until your printer restarts automatically after the update is completed.
Do not download any updates from the Samsung website. The firmware update file that we provided in this article is not protected against any updates from the Samsung website. If you download any updates yourself, you may overwrite the new firmware and cause the error to reappear.
Common Questions and Answers about Fixing ML1660 V1.01.00.30.FLS Error
In this section, we will answer some of the common questions that you may have about fixing ML1660 V1.01.00.30.FLS error. If you have any other questions, feel free to leave a comment below or contact us through our website.
Q: Is this software safe and legal to use?
A: Yes, this software is safe and legal to use. It does not contain any viruses, malware or spyware that can harm your computer or printer. It also does not violate any copyrights or patents of Samsung or any other parties. However, you should be aware that using this software may void your printer warranty, so use it at your own risk.
Q: Will this software work for other printer models or brands?
A: No, this software will only work for Samsung ML-1660, ML-1665 and ML-1667 printers. Do not use it for other printer models or brands, as it may cause damage or malfunction.
Q: Will this software work for other firmware versions?
A: No, this software will only work for firmware version V1.01.00.30.FLS. Do not use it for other firmware versions, as it may not be compatible or effective.
Q: How can I check my printer firmware version?
A: You can check your printer firmware version by printing a test page. To do this, turn off your printer and hold the Cancel button while turning it on again. Release the button when all lights begin flashing. A test page will be printed with information about your printer, including the firmware version.
Q: How can I restore my printer firmware to the original version?
A: You can restore your printer firmware to the original version by downloading and installing the official firmware update from the Samsung website. To do this, follow these steps:
Go to https://www.samsung.com/us/support/owners/product/mono-laser-printer-ml-1665 and select your printer model.
Click on Downloads and then on Firmware.
Download the latest firmware update file for your printer model and save it to your computer.
Run the file and follow the instructions on the screen to install the firmware update.
Restart your printer and check if the error is gone.
Conclusion
In conclusion, fixing ML1660 V1.01.00.30.FLS error is not a difficult task if you follow the steps that we provided in this article. By updating your printer firmware, you can solve various problems with your printer and enjoy its benefits. However, you should also be aware of the risks and precautions that come with this process, such as voiding your warranty, losing your data or damaging your printer. Therefore, use this software at your own risk and responsibility.
We hope that this article was helpful and informative for you. If you have any questions or feedback, please leave a comment below or contact us through our website. Thank you for reading and happy printing!
Conclusion
In conclusion, fixing ML1660 V1.01.00.30.FLS error is not a difficult task if you follow the steps that we provided in this article. By updating your printer firmware, you can solve various problems with your printer and enjoy its benefits. However, you should also be aware of the risks and precautions that come with this process, such as voiding your warranty, losing your data or damaging your printer. Therefore, use this software at your own risk and responsibility.
We hope that this article was helpful and informative for you. If you have any questions or feedback, please leave a comment below or contact us through our website. Thank you for reading and happy printing! b99f773239
https://www.inko-gnito.cz/group/inkognito-group/discussion/77abf846-b52f-4723-928a-1052a7319b27